The Palmtip is a cane tip of less sticking to confirm the ground thoroughly with ease for a sure and easy cane travel.
* You can confirm the ground thoroughly as you like and trail the line of pavement as well because the tip slides to any directions freely and easily.
* You can reduce the risk of stumble or fall because the tip can be pushed forward with constant touching without lifting.
* You can reduce sticking shocks and sudden stops with less effort or cane skills.
Enlarge Image 
Enlarge Image
Features
* The unique cushion connects the head and the neck. The photo above shows the head is rocked by the sticking stress to let it on the protrusion to slip over irregularities of the ground.
* Large 40 mm diameter head can prevent catching. Light 20 gram weight and 55 mm length.
* The head is made of ultra-polymer which is slippery and lasts several times longer than nylon.
* The neck is made of nylon.
How to use
* Touch lightly and push horizontally to slide the tip.
* Turn the grip occasionally to make the tip wear evenly.
* Fasten strap at the opposite end to the tip when you fold the folding cane.
Socket style (Push on style) Palmtip
The socket of PT411-12 receives shafts of 12 mm to 12.7 mm diameters.
The socket of PT411-12.7 receives shafts of 12.7 mm to 13 mm diameters.
Attaching: Force the end of the shaft to fit the socket. Tap the head at a concrete floor vertically several times to thrust the shaft into the socket. If it is cold or it is hard to go in, soak it in warm water for a while beforehand.
Detaching: Hold the neck by a rubber glove or a plier, and twist off the shaft.
* Other styles are possible.
Unit Conversions: 40 mm (1.57"), 55 mm (2.1"), 20 grams (0.7 oz), 12 mm (0.47"), 12.7 mm (0.5"), 13 mm (0.51").
Designed and made by Takes Corporation
1579-1 Iijimacho, Sakaeku Yokohama, 244-0842 JAPAN
to HOME http://www.palmsonar.com (May 28, 2008)